標準號：BS EN ISO 10414-1-2008
中文標準名稱：石油和天然氣工業.鉆井泥漿的現場測試.第1部分:水基泥漿
英文標準名稱：Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
標準類型：E92
發布日期：2008/12/31 12:00:00
實施日期：2008/12/31 12:00:00
中國標準分類號：E92
國際標準分類號：75.180.10
適用范圍：This part of ISO 10414 provides standard procedures for determining the following characteristics ofwater-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) water, oil and solids contents;e) sand content;f) methylene blue capacity;g) pH;h) alkalinity and lime content;i) chloride content;j) total hardness as calcium.Annexes A through K provide additional test methods which may be used for- chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;- determination of shear strength;- determination of resistivity;- removal of air;- drill-pipe corrosion monitoring;- sampling, inspection and rejection;- rig-site sampling;- calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluidbalances;- permeability-plugging testing at high temperature and high pressure for two types of equipment;- example of a report form for water-based drilling fluid.