標準號：ISO 16369-2007
中文標準名稱：升降工作平臺.桅桿爬升式工作平臺
英文標準名稱：Elevating work platforms - Mast-climbing work platforms
標準類型：J80
發布日期：2007/10/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J80
國際標準分類號：53.020.99
引用標準：ISO 4302;ISO 6336-1;ISO 6336-2;ISO 6336-3;ISO 6336-4;ISO 6336-5;ISO 8686-1;ISO 12100-2-2003;ISO 13849-1-2006;ISO 13852;ISO 13854;IEC 60065;IEC 60204-1-2005;IEC 60529;IEC 60947-5-1-2003;EN 614-1;EN 953;EN 982
適用范圍：This International Standard specifies particular safety requirements for mast-climbing work platforms (MCWP)which are temporarily installed and are manually or power-operated, and which are designed to be used byone or more persons from which to carry out work.NOTE The vertical-moving components (work platforms) are also used to move those same persons and theirequipment and materials to and from a single boarding point. These restrictions differentiate MCWP from builder’s hoists.This International Standard is also applicable to permanently installed MCWP.This International Standard is applicable to work platforms which are elevated by a drive system and guidedby and moved along their supporting masts, where the masts may or may not require lateral restraint fromseparate supporting structures.This International Standard is applicable to any combination of the following alternatives:-- one or more masts;-- mast tied or untied;-- mast of fixed or variable length;-- masts vertical or inclined between 0° and 30° to the vertical;-- masts which are standing or hanging;-- movable or static base (chassis or base frame);-- manual or power-operated elevation;-- towed or self-powered ground travel on site, excluding road traffic regulation requirements;-- driven using electric, pneumatic, hydraulic motors or internal combustion engines.This International Standard identifies the hazards arising during the various phases in the life of suchequipment and describes methods for the elimination or reduction of these hazards and for the use of safeworking practices.This International Standard does not specify the requirements for dealing with the hazards involved in themanoeuvring, erection or dismantling, fixing or removing of any materials or equipment which are not part ofthe MCWP, nor does it deal with the handling of specific hazardous materials.This International Standard does not specify the requirements for delivering persons and materials to fixedlanding levels. Such equipment is referred to as lifts or hoists and is dealt with by other InternationalStandards.This International Standard does not apply to mobile elevating work platforms (MEWPs) in accordance withISO 16368, suspended access equipment in accordance with EN 1808 or lifting tables in accordance withEN 1570.