標準號：BS 2782-10 Method 1002-1977
中文標準名稱：塑料試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1002:灼燒重量損失測定
英文標準名稱：Methods of testing plastics - Glass reinforced plastics - Determination of loss on ignition
標準類型：G32;G31
發布日期：1977/8/31 12:00:00
實施日期：1977/8/31 12:00:00
中國標準分類號：G32;G31
國際標準分類號：83.120
適用范圍：This standard describes a method for determining the loss on ignition of glass reinforced plastics. 1 If the material to be tested contains only glass and a resin which is completely combustible (under the conditions of this test method), the loss on ignition is equal to the resin content (see note below). The glass content may then be calculated by difference. 2 In the case of products which contain non-combustible mineral fillers, other than glass reinforcement, or resins which are incompletely combustible (under the conditions of this test method), the presence of which materials can be recognized or verified by examination of the residue after ignition, this method only allows the determination of the ash by difference. MOTE. The glass used as a reinforcement is usually coated with ancillary products (sizing, finish, etc.) which most often are completely eliminated during calcination and therefore included in the loss on ignition.