標準號：IS 1448 Pt.60-1971
發布日期：1971/9/1 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：1.1 This method describes five test procedures for the estimation of consistency of lubricating greases by measuring the penetration of a standard cone. Procedures are given for the measurement of unworked, undis-turbed, worked, prolonged work and block penetration. For penetrations up to 400 Type A cone shown in Fig. 2A and for penetrations above 400 and up to 475 Type B cone shown in Fig. 2B shall be used.1.1.1 Undisturbed and unworked penetrations do not generally repre-sent the consistency of greases in use as effectively as do worked penetra-tions. The latter are usually preferred for inspecting lubricating greases.1.1.2 Penetration of block greases may be obtained on those products which are sufficiently hard to hold their shape. These greases generally have penetrations below 85.