標準號：DIN EN 13445-6-2017
中文標準名稱：非受火壓力容器.第6部分:球墨鑄鐵制壓力容器和壓力零部件的設計和制造要求.德文版本EN 13445-6-2014
英文標準名稱：Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
標準類型：J74
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J74
國際標準分類號：23.020.30
引用標準：EN 287-6-2010;EN 764-2-2012;EN 764-5-2002;EN 837-1-1996;EN 837-3-1996;EN 1011-8-2004;EN 1369-2012;EN 1370-2011;EN 1371-1-2011;EN 1559-1-2011;EN 1559-3-2011;EN 1563-2011;EN 12680-3-2011;EN 12681-2003;EN 13068-1-1999;EN 13068-2-1999;EN 13445-1-2014;EN 13445
適用范圍：This Part of the European Standard EN 13445 specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lamellar graphite cast iron grades for ferritic and austenitic grades, which are explicitly excluded from this European Standard because of low elongation and brittle material behaviour, which requires the use of different safety factors and a different approach.