標準號：DIN EN ISO 294-1-2017
中文標準名稱：塑料.熱塑性塑料試件的注模塑法.第1部分:一般原理、多用途模塑件及條形試件(ISO 294-1-2017);德文版本EN ISO 294-1-2017
英文標準名稱：Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017); German version EN ISO 294-1:2017
標準類型：G31
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.20
引用標準：DIN EN ISO 179-1-2010;DIN EN ISO 294-2-2006;DIN EN ISO 294-3-2003;DIN EN ISO 294-4-2003;DIN EN ISO 294-5-2013;DIN EN ISO 10350-1-2014;DIN EN ISO 10350-2-2011;DIN EN ISO 11403-1-2014;DIN EN ISO 11403-2-2013;DIN EN ISO 11403-3-2014;DIN EN ISO 20753-2014;ISO
適用范圍：This document specifies the general principles to be followed when injection moulding test specimens of thermoplastic materials and gives details of mould designs for preparing two types of specimen for use in acquiring reference data, i.e. type A1 and type B1 test specimens as specified in ISO 20753, and provides a basis for establishing reproducible moulding conditions. Its purpose is to provide consistent descriptions of the main parameters of the moulding process and to establish a uniform practice in reporting moulding conditions. The particular conditions required for the reproducible preparation of test specimens will vary for each material used and are given in the International Standard for the relevant material or are to be agreed upon between the interested parties.