標準號：IEC 60749-9-2017
中文標準名稱：半導體器件.機械和氣候試驗方法.第9部分:標記的永久性
英文標準名稱：Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking
標準類型：L40
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L40
國際標準分類號：31.080.01
適用范圍：The purpose of this part of IEC 60749 is to determine whether the marks on solid state semiconductor devices will remain legible when subjected to the application and removal of labels or the use of solvents and cleaning solutions commonly used during the removal of solder flux residue from the printed circuit board manufacturing process. This test is applicable to all package types. It is suitable for use in qualification and/or process monitor testing. The test is considered non-destructive. Electrical or mechanical rejects can be used for the purpose of this test. NOTE 1 This procedure does not apply to laser branded packages. Many available solvents that could be used are either not sufficiently active, too stringent, or even dangerous to humans when in direct contact or when fumes are inhaled. NOTE 2 The composition of solvents used in this document is considered typical and representative of the desired stringency as far as the usual coatings and markings are concerned.