標準號：DIN EN 10028-5-2009
中文標準名稱：承壓鋼扁平軋材.第5部分:熱機軋制的可焊接細粒鋼.英文版本EN 10028-5-2009
英文標準名稱：Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; English version of DIN EN 10028-5:2009-09
標準類型：H46
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H46
國際標準分類號：77.140.30;77.140.50
引用標準：EN 10204-2004;EN 10028-1-2007+A1-2009
適用范圍： This European Standard specifies the requirements for flat products for pressure equipments made of thermomechanically rolled steels as specified in Table 1.The steels are not suitable for hot forming.NOTE 1 At the time of publication of this European Standard, no sufficient data for the standardization of the elevatedtemperature properties of these steels was available. If their use at such temperatures is intended the conditions for this shouldbe specially agreed between the interested parties.The requirements of EN 10028-1:2007 + A1:2009 also apply.NOTE 2 Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption ofconformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in thisEuropean Standard (Part 1 and this Part 5 of the series) and does not presume adequacy of the material to a specific item ofequipment. Consequently, the assessment of the technical data stated in this material standard against the design requirementsof this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.