標準號：ISO 16003-2008
中文標準名稱：用氣體的滅火設備部件.要求和試驗方法.容器閥組件及其激勵器、選擇閥及其激勵器、噴嘴、柔性和剛性連接器及止回閥和非止回閥
英文標準名稱：Components for fire-extinguishing systems using gas - Requirements and test methods - Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves
標準類型：C84
發布日期：2008/9/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：C84
國際標準分類號：13.220.10
引用標準：ISO 7-1;ISO 228-1;ISO 7005;ISO 14520-1-2006;IEC 60068-2-6;IEC 60730-2-14;ASTM B117
適用范圍：This International Standard specifies requirements and describes test methods for the following componentsused in gaseous fire-extinguishing systems: container valve assemblies, which include container valve,actuator and. if applicable, a diptube; selector valves and their actuators; agent distribution nozzles; flexibleconnectors; and check and non-return valves.Container valve assemblies are designed to control the extinguishant flow from the container to thedistribution pipe work. They are normally in the closed position. The automatic control device triggers theactuator and the valve opens. Where applicable, the requirements contained in the test methods also apply toseparate container valves.The design of the nozzles influences the area coverage, the height limitations, the discharge rate and the flowrate.This International Standard is applicable to check valves installed between container valve and manifold andnon-return valves installed in pilot lines, except those valves that are tested in combination with non-electricalcontrol devices. It is required that non-return and check valves allow the passage in the direction of flow andprevent flow in the reverse direction.NOTE For the purpose of this International Standard, the pressure in megapascals (bars) means gauge pressure,unless otherwise indicated.