標準號：DIN EN 61968-13-2009
中文標準名稱：電業應用綜合.分配管理的系統接口.第13部分:分配用通訊接口模塊(CIM)RDF模型交換格式
英文標準名稱：Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution (IEC 61968-13:2008); English version EN 61968-13:2008
標準類型：M14
發布日期：1999/12/31 12:00:00
實施日期：2009/2/1 12:00:00
中國標準分類號：M14
國際標準分類號：35.200
引用標準：IEC 61968-1;IEC 61968-3;IEC 61968-4;IEC 61970-301;IEC 61970-501
適用范圍：This part of IEC 61968 specifies the format and rules for exchanging modeling information basedupon the CIM (Common Information Model) and related to distribution network data.The intention of this part of IEC 61968 is to allow the exchange of instance data in bulk. Thus, theimported network model data should be sufficient to allow performing network connectivity analysis,including network tracing, outage analysis, load flow calculations, etc. This part could be used forsynchronizing geographical information system databases with remote control system databases.This part is closely linked to IEC 61970-452 Energy Management System Application ProgramInterface (EMS-API) CIM Network applications model exchange specification. Thus, this documenthas been written in order to reduce its maintenance. It describes only differences with IEC 61970-452. Nevertheless, as IEC 61970-452 is a future international standard, this part still has duplicateinformation with IEC 61970-452, in order to be more understandable.It uses the CIM RDF1) Schema presented in IEC 61970-501 as the meta-model framework forconstructing XML2) documents containing power system modeling information. The syntax of thesedocuments is called CIM XML format. Model exchange by file transfer serves many useful purposes,specially when some applications need to have the complete network model defined. Though theformat can be used for general CIM-based information exchange, in this part of IEC 61968, specificprofiles (or subsets) of the CIM are identified in order to address particular exchange requirements.Given the CIM RDF Schema described in IEC 61970-501, a DMS power system model can beconverted for export as an XML document, see Figure 1. This document is referred to as a CIM XMLdocument. All of the tags (resource descriptions) used in the CIM XML document are supplied by theCIM RDF schema. The resulting CIM XML model exchange document can be parsed and theinformation imported into a foreign system. This part of IEC 61968 is aligned to CIM Model version11, CPSM 3.0 profile.