標準號：BS EN 200-2008
中文標準名稱：衛生用水龍頭.1型和2型供水設備用單一水龍頭和組合水龍頭.通用技術規范
英文標準名稱：Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
標準類型：Q81
發布日期：2009/1/31 12:00:00
實施日期：2009/1/31 12:00:00
中國標準分類號：Q81
國際標準分類號：91.140.70
引用標準：EN 246;EN 248;EN 1112;EN 1113;EN 1254-2;EN 1717;prEN 13618-1;prEN 13618-2;EN 14506;EN ISO 228-1;EN ISO 3822-1;EN ISO 3822-2;EN ISO 3822-4-1997
適用范圍：This European Standard specifies:a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in:1) a supply system of Type 1 (see Figure 1);2) a supply system of Type 2 (see Figure 2);b) the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, enduranceand acoustic characteristics of nominal size ? and ? single taps and combination taps;c) test methods to verify the characteristics.The tests described in this European Standard are type tests (laboratory tests) and not quality control tests carriedout during manufacture.This European Standard applies to draw-off taps (single taps and combination taps) for use with sanitaryappliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens, i.e. for use withbaths, wash basins, bidets, showers and sinks.Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar].Figure 2 shows a supply system of Type 2 with a pressure range of (0,01 to 1,0) Mpa [(0,1 to 10) bar].This European Standard applies to sanitary draw-off taps of nominal size ? and ? (PN 10).The conditions of use and classifications are given in Table 1. The Table 2 gives the performance characteristics tobe noted if the tap is used outside the recommended operating range.