標準號：SAE J 2284/3-2010
中文標準名稱：在500 KBPS時車輛應用的高速CAN(HSC)
英文標準名稱：High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS
標準類型：T04
發布日期：2010/3/3 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T04
國際標準分類號：35.200;43.180
引用標準：CISPR 25-2008;ISO 7498-1984;ISO 7637-1-2002;ISO 11898-1993;ISO 14229-1998;SAE J 551/4-2000;SAE J 551/11-2000;SAE J 551/15-2009;SAE J 1113/13-2004;SAE J 1113/21-2005;SAE J 1113/41-2000;SAE J 1213/1-1997;SAE J 1930-2008;SAE J 1962-2002;SAE J 2190-1993;97029
適用范圍：This SAE Recommended Practice will define the Physical Layer and portions of the Data Link Layer of the ISO model for a 500 KBPS High-Speed CAN (HSC) protocol implementation. Both ECU and media design requirements for networks will be specified. Requirements will primarily address the CAN physical layer implementation. Requirements will focus on a minimum standard level of performance from the High-Speed CAN (HSC) implementation. All ECUs and media shall be designed to meet certain component level requirements in order to ensure the HSC implementation system level performance at 50 KBPS. The minimum performance level shall be specified by system level performance requirements or characteristics described in detail. This document is designed such that if the electronic control unit requirements defined are met, then the system level attributes should b obtainable. This document will address only requirements which may be tested at the ECU and media level. No requirements which apply to the testing of the HSC implementation as integrated into a vehicle are contained in this document. However, compliance with all ECU and media requirements will increase the possibility of communication compatibility between separately procured components and will greatly simplify the task of successfully integrating a HSC communication system in a vehicle.