標準號：BS EN 1112-2008
中文標準名稱：衛生開關龍頭.1型和2型供水系統用衛生開關龍頭的淋浴出口.通用技術規范
英文標準名稱：Sanitary tapware - Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification
標準類型：Q81
發布日期：2008/8/29 12:00:00
實施日期：2008/8/29 12:00:00
中國標準分類號：Q81
國際標準分類號：23.040.70
引用標準：EN 248;EN 1113;EN ISO 228-1;EN ISO 3822-1;EN ISO 3822-4
適用范圍：This European Standard specifies:? the dimensional, leaktightness, mechanical, hydraulic and acoustic characteristics with which showeroutlets shall comply;? the procedures for testing these characteristics.This European Standard applies to shower heads and hand showers of any material used for ablutionarypurposes and intended for equipping and supplementing sanitary tapware for baths and showers.This European Standard applies to shower heads and hand showers connected downstream of the obturatorof the tapware.Integral and remote spray attachments incorporated in tapware (e.g. sink and wash basin mixing valves) arenot covered by this standard.Details of pressures and temperatures are given in Table 1.Table 1 — Conditions of use/Classifications