標準號：BS 919-2-2007
中文標準名稱：螺紋規限值和公差.惠氏螺紋和B.A.螺紋牙樣的螺紋規用規范
英文標準名稱：Screw gauge limits and tolerances – Part 2: Specification for gauges for screw threads of Whitworth and B.A. forms
標準類型：J05
發布日期：2007/11/30 12:00:00
實施日期：2007/11/30 12:00:00
中國標準分類號：J05
國際標準分類號：21.040.20
引用標準：BS 84;BS 1044-1-1964
適用范圍：This Part of BS 919 specifies requirements for the following gaugesintended for checking screw threads in the regular series, suchas BS Whit., BS Fine, B.A., BSC and BS Conduit.a) Screw gauges for general and reference use:1) solid (non-adjustable) screw plug gauges, GO and NOT GO;2) solid and adjustable GO screw ring gauges;3) adjustable thread calliper gauges, GO and NOT GO.NOTE NOT GO effective diameter ring gauges are also included sincethey have certain limited applications. In principle, however, their use isnot recommended.b) Plain plug gauges and plain calliper gauges for the crests of threads.NOTE Provision is made in the standard for both GO and NOT GO plaingauges, but GO plain gauges are normally required only in the case ofthreads where the corresponding GO screw gauges do not control themaximum metal condition at the crests of the threads of the product.c) Setting plugs for adjustable screw ring and thread calliper gauges,GO and NOT GO.This standard may be applied also to gauges for any screw threads ofWhitworth form, but not to gauges for Acme, buttress or round threads.Annex A provides guidance on the various types of gauges.Information relating to the effective diameter equivalent of pitch andangle errors and to the thread form of NOT GO effective diametergauges is given in Annex B, Annex C and Annex D.No requirements are specified for the materials for gauges, butguidance on the hardness of gauges is given in Annex E.