標準號：DIN EN 1439-2008
中文標準名稱：液化石油氣(LPG)設備和附件.LPG鋼瓶罐裝前、罐裝中以及灌裝后的檢驗程序
英文標準名稱：LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling; English version of DIN EN 1439:2008-06
標準類型：E98
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：E98
國際標準分類號：23.020.30
引用標準：EN 1440;EN 10028-7;EN 12816;EN 13952;EN 14140;EN 14427-2004;EN 14894
適用范圍：This European Standard specifies the procedures to be adopted when checking transportable refillable LPGcylinders before, during and after filling.This European Standard applies to transportable refillable LPG cylinders of water capacity from 0,5 I up to andincluding 150 I. This European Standard does not apply to cylinders permanently installed in vehicles, or toplant and filling equipment.This standard is applicable to the following:-- welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or an equivalent standard);-- welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalent standard);-- welded aluminium LPG cylinders (see EN 13110 or an equivalent standard);-- composite LPG cylinders (see EN 14427 or an equivalent standard).Specific requirements for different types of cylinders are detailed in Annex A, Annex B, Annex C and Annex D.NOTE Rejection limits for a particular type of protected cylinder are given in Annex G.This standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders)and also to existing non RID/ADR cylinder populations.