標準號：SAE J 2721-2011
中文標準名稱：商用車輛部件的推薦腐蝕試驗方法
英文標準名稱：Recommended Corrosion Test Methods for Commercial Vehicle Components
標準類型：T30
發布日期：2011/11/21 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T30
國際標準分類號：43.040.01
引用標準：ASTM B 117-2011;ISO/DIS 8044-1997;ISO 9227-1990;ISO 10062-1991;ISO/FDIS 10290;ISO/DIS 11130-2007;ISO 11306-1998;ISO 11463-1995;ISO 11474-1998;ISO 11845-1995;ISO/DIS 14993-1999;MIL-STD-810-2008;SAE J 400-2002;SAE J 447-1995;SAE J 840-2007;SAE J 1455-2011;S
適用范圍：This document establishes recommended practices to validate acceptable corrosion performance of metallic components and assemblies used in medium truck, heavy truck, and bus and trailer applications. The focus of the document is methods of accelerated testing and evaluation of results. A variety of test procedures are provided that are appropriate for testing components at various locations on the vehicle. The procedures incorporate cyclic conditions including corrosive chemicals, drying, humidity, and abrasive exposure. These procedures are intended to be effective in evaluating a variety of corrosion mechanisms as listed in Table 1. Test duration may be adjusted to achieve any desired level of exposure. Aggravating conditions such as joint rotation, mechanical stress, and temperature extremes are also considered. This document does not address the chemistry of corrosion or methods of corrosion prevention. For information in these areas, refer to SAE J447 or similar standard.