標準號：SAE J 2836/2-2011
中文標準名稱：插入式車輛和場外直流充電器之間交流用例
英文標準名稱：Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
標準類型：T36
發布日期：2011/9/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T36
國際標準分類號：43.120
引用標準：SAE J 1772-2010;SAE J 2836/1-2010;SAE J 2836/3;SAE J 2847/1-2011;SAE J 2847/2;SAE J 2847/3;SAE J 2931/1
適用范圍：This SAE Information Report SAE J2836/2uTuM establishes use cases and general information for communication between plug-in electric vehicles and the DC Off-board charger. Where relevant, this document notes, but does not formally specify, interactions between the vehicle and vehicle operator. This applies to the off-board DC charger for conductive charging, which supplies DC current to the vehicle battery of the electric vehicle through a SAE J1772uTuM Hybrid coupler or SAE J1772uTuM AC Level 2 type coupler on DC power lines, using the AC power lines or the pilot line for PLC communication, or dedicated communication lines that is further described in SAE J2847/2. The specification supports DC energy transfer via Forward Power Flow (FPF) from grid-to-vehicle. The relationship of this document to the others that address PEV communications is further explained in section 5. This is the 1st version of this document and completes step 1 effort that captures the initial objectives of the SAE task force. The intent of step 1 was to record as much information on ?what we think works? and publish. The effort continues however, to step 2 that allows public review for additional comments and viewpoints, while the task force also continues additional testing and early implementation. Results of step 2 effort will then be incorporated into updates of this document and lead to a republished version.