標準號：BS ISO 10110-5-2007
中文標準名稱：光學和光子學.光學元件和系統制圖準備.表面形狀公差
英文標準名稱：Optics and photonics - Preparation of drawings for optical elements and systems - Surface form tolerances
標準類型：N30
發布日期：2007/9/28 12:00:00
實施日期：2007/9/28 12:00:00
中國標準分類號：N30
國際標準分類號：01.100.20;37.020
適用范圍：ISO 10110 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. This part of ISO 10110 specifies rules for indicating the tolerance for surface form. NOTE 1 The terminology of interferometry is used for the specification of tolerances and, in particular, for the units in which the tolerances are to be specified; however, this does not stipulate that only interferometric methods may be used for the actual testing of optical parts. Other non-interferometric methods may be used if the results are converted to the units specified here. This part of ISO 10110 applies to surfaces of both spherical and aspheric form. NOTE 2 ISO 10110-12 allows the surface form tolerance for aspheric surfaces to be specified without reference to this part of ISO 10110.