標準號：BS EN 15048-1-2007
中文標準名稱：非預加負荷結構的螺栓連接組件.一般要求
英文標準名稱：Non-preloaded structural bolting assemblies - General requirements
標準類型：J13
發布日期：2007/9/28 12:00:00
實施日期：2007/9/28 12:00:00
中國標準分類號：J13
國際標準分類號：21.060.01
引用標準：prEN 1090-2-2005;EN 1993-1-8-2005;EN 10045-1;EN 10204;EN 15048-2;EN 20898-2;EN ISO 898-1;EN ISO 3506-1;EN ISO 3506-2;EN ISO 6507-1;EN ISO 9001
適用范圍：This part of this European Standard specifies the general requirements for the components of bolt/nut/washerassemblies for non-preloaded structural bolting and for the assemblies themselves. It applies to bolts (includingscrews, studs and stud bolts) and nuts made of carbon steel, alloy steel and stainless steel with the followingproperty classes:? bolts made of carbon steel and alloy steel: 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9;? nuts made of carbon steel and alloy steel: 4, 5, 6, 8, 10, 12;? bolts made of austenitic stainless steel: 50, 70, 80;? nuts made of austenitic stainless steel: 50, 70, 80;? if appropriate, washers according to hardness class HV 100 or HV 200.NOTE The property classes 4.8, 5.8 and 6.8 may be subjected to limitations of use, it is recommended to refer toprEN 1090-2.The standard applies to thread sizes from M12 to M36 and to the associated washers but does not preclude theuse of other sizes.Bolted connections with components according to this European Standard are able to be shear and/or tensileloaded.Bolts, nuts and washers according to this European Standard are not normally intended for welding.