標準號：BS EN 60384-4-2-2007
中文標準名稱：電子設備用固定電容器.第4-2部分:空白詳細規范.固體(二氧化錳)電解質的鋁電解固定電容器.評估等級EZ
英文標準名稱：Fixed capacitors for use in electronic equipment — Part 4-2: Blank detail specification — Fixed aluminium electrolytic capacitors with solid (MnO
標準類型：L11
發布日期：2008/3/31 12:00:00
實施日期：2008/3/31 12:00:00
中國標準分類號：L11
國際標準分類號：31.060.50
引用標準：IEC 60384-1;IEC 60384-4;IEC 60410
適用范圍：Blank detail specificationA blank detail specification is a supplementary document to the sectional specification andcontains requirements for style and layout and minimum content of detail specifications. Detailspecifications not complying with these requirements may not be considered as being inaccordance with IEC specifications nor shall they be so described.In the preparation of detail specifications, the contents of 1.4 of the sectional specificationshall be taken into account.The numbers between brackets on the first page correspond to the following informationwhich shall be inserted in the position indicated.Identification of the detail specification[1] The International Electrotechnical Commission or the National Standards Organizationunder whose authority the detail specification is drafted.[2] The IEC or National Standards number of the detail specification, data of issue and anyfurther information required by the national system.[3] The number and issue number of the IEC or national generic specification.[4] The IEC number of the blank detail specification.Identification of the capacitor[5] A short description of the type of capacitor.[6] Information on typical construction (when applicable).NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in thedetail specification in this position.[7] Outline drawing with main dimensions which are of importance for interchangeabilityand/or reference to the national or international documents for outlines. Alternatively, thisdrawing may be given in an annex to the detail specification.[8] Application or group of applications covered and/or assessment level.NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectionalspecification. This implies that one blank detail specification may be used in combination with severalassessment levels, provided the grouping of the tests does not change.[9] Reference data on the most important properties, to allow comparison between thevarious capacitor types.