標準號：ISO 1179-3-2007
中文標準名稱：通用和液壓傳動用連接件.帶彈性體密封件或金屬對金屬密封件的ISO 228-1螺紋開口和螺柱端頭.第3部分:帶扣環O型密封圈(G型和H型)密封的輕型(L系列)螺柱端頭
英文標準名稱：Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
標準類型：J15
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J15
國際標準分類號：23.100.40
引用標準：ISO 228-1;ISO 3601-3-2005;ISO 4759-1-2000;ISO 25598;ISO 19879
適用范圍：This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustableand adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring(types G and H, respectively).Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures upto 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable studends (type H). The permissible working pressure depends upon size, materials, design, working conditions,application, etc.Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance.Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 toassure that components made to this part of ISO 1179 comply with the performance ratings.NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-2.NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for newdesigns in hydraulic and pneumatic fluid power applications.