標準號：BS EN 61000-4-18-2007+A1-2010
中文標準名稱：電磁兼容性(EMC).第4-18部分:測試和測量技術.阻尼振蕩波抗擾試驗
英文標準名稱：Electromagnetic compatibility (EMC). Part 4-18: Testing and measurement techniques. Damped oscillatory wave immunity test
標準類型：L06
發布日期：2007/7/31 12:00:00
實施日期：2007/7/31 12:00:00
中國標準分類號：L06
國際標準分類號：33.100.20
適用范圍：This part of IEC 61000-4 relates to the immunity requirements and test methods for electricaland electronic equipment, under operational conditions, with regard to:a) repetitive damped oscillatory waves occurring mainly in power, control and signal cablesinstalled in high voltage and medium voltage (HV/MV) substations;b) repetitive damped oscillatory waves occurring mainly in power, control and signal cablesinstalled in gas insulated substations (GIS) and in some cases also air insulatedsubstations (AIS) or in any installation due to HEMP phenomena.The object of this basic standard is to establish the immunity requirements and a commonreference for evaluating in a laboratory the performance of electrical and electronic equipmentintended for residential, commercial and industrial applications, as well as of equipmentintended for power stations and substations, as applicable.NOTE As described in IEC guide 107, this is a basic EMC publication for use by product committees of the IEC.As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunitytest standard should be applied or not, and if applied, they are responsible for determining the appropriate testlevels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committeesin the evaluation of the value of particular immunity tests for their products.The purpose of this standard is to define:– test voltage and current waveforms;– ranges of test levels;– test equipment;– test setup;– test procedure.The object of this standard is to establish a common reference for evaluating the immunity ofelectrical and electronic equipment when subjected to damped oscillatory waves. The testmethod documented in this part of IEC 61000 describes a consistent method to assess theimmunity of an equipment or system against a defined phenomenon.