標準號：BS EN ISO 14577-4-2007
中文標準名稱：金屬材料.測量硬度和材料參數用儀器壓痕試驗.金屬和非金屬覆層試驗方法
英文標準名稱：Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
標準類型：H22
發布日期：2007/6/29 12:00:00
實施日期：2007/6/29 12:00:00
中國標準分類號：H22
國際標準分類號：77.040.10
適用范圍：ISO 14577-4:2007 specifies a method for testing coatings that is particularly suitable for testing in the nano/micro range applicable to thin coatings.This test method is limited to the examination of single layers when the indentation is carried out normal to the test piece surface, but graded and multilayer coatings can also be measured in cross-section if the thickness of the individual layers or gradations is greater than the spatial resolution of the indentation process.The test method is not limited to any particular type of material. Metallic, non-metallic and organic coatings are included in the scope of ISO 14577-4:2007.The application of ISO 14577-4:2007 regarding measurement of hardness is only possible if the indenter is a pyramid or a cone with a radius of tip curvature small enough for plastic deformation to occur within the coating. The hardness of visco-elastic materials, or materials exhibiting significant creep will be strongly affected by the time taken to perform the test.