標準號:BS EN ISO 15156-3-2009
中文標準名稱:石油、石化和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.耐裂化CRAs(耐腐蝕合金)和其他合金
英文標準名稱:Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
標準類型:E90
發布日期:2009/11/30 12:00:00
實施日期:2009/11/30 12:00:00
中國標準分類號:E90
國際標準分類號:75.180.01
引用標準:ISO 6507-1;ISO 6508-1;ISO 6892-1;ISO 7539-7;ISO 10423;ISO 11960;ISO 15156-1-2009;ISO 15156-2-2009;ASTM A747/A747M;ASTM E562;EFC Publications Number 17;NACE TM0177-1996;NACE CORROSION/95 , Paper 47, (Houston), 1995, Test methodology for elemental sulfur-re
適用范圍:This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress cracking (GHSC).This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2009, Clause 5.This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.
相關標準
《GB/T9265-2009》建筑涂層 涂層耐堿性的測定
《GB/T16422.3-2014》塑料實驗室光源曝露試驗方法 第3部分:熒光紫外燈
《GB/T1033.1-2008》塑料 非泡沫塑料密度的測定 第1部分:浸漬法,液體比重瓶法和滴定法
《GB/T1231-2006》鋼結構用高強度大六角頭螺栓、大六角螺母、墊圈技術條件
《GB/T13682-1992》螺紋緊固件軸向載荷疲勞試驗方法
《AS/NZS1252.1-2016》結構工程用高強度鋼制緊固件組合-螺栓、螺母和墊圈 第一部分:技術要求
《GB/T3098.8-2010》緊固件機械性能 -200℃~+700℃使用的螺栓 連接零件
《ISO16047:2005/Amd1:2012》緊固件 扭矩-夾緊力試驗
《JISB1186-2013》摩檫連接用高強度六角螺栓、六角螺母、平墊圈組件
《AS/NZS1252.2-2016》結構工程用高強度鋼制緊固件組合-螺栓、螺母和墊圈 第二部分:螺栓組件的驗證試驗
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;