標準號：DIN 1732-3-2007
中文標準名稱：鋁和鋁合金用填充金屬.第3部分:全焊金屬的試件、試樣和機械及技術性能
英文標準名稱：Filler metals for aluminium and aluminium alloys - Part 3: Test pieces, test specimens, mechanical and technological properties of all-weld metal
標準類型：J33
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J33
國際標準分類號：25.160.20
引用標準：DIN 50125;DIN EN 1597-1;DIN EN 10002-1;DIN EN ISO 544;DIN EN ISO 4063;DIN EN ISO 6947;DIN EN ISO 18273
適用范圍：This standard covers the determination of the mechanical-technological properties of the all-weld metaldeposited by filler metals for aluminium as in DIN EN ISO 18273 and DIN EN ISO 544. It describes thepreparation of the test piece using different welding processes, and specifies minimum values for proofstrength, tensile strength and elongation at break.NOTE The minimum mechanical-technological values determined on the basis of this standard are only of interestfor technical delivery conditions and for a comparison of filler metals.