標準號：BS EN 14444-2005
中文標準名稱：結構粘合劑.定性評定粘合組件耐久性.楔形破裂試驗
英文標準名稱：Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test
標準類型：G38
發布日期：2005/11/26 12:00:00
實施日期：2005/11/26 12:00:00
中國標準分類號：G38
國際標準分類號：83.180
適用范圍：This document simulates in a qualitative manner mechanical forces and important environmental influenceson an adhesive-bonded joint at a metal polymer interfaces it can also be used as a method of checking thesurface preparation of substrates, with a limited detection level.The test is applicable at the present time to the bonding of aluminium and titanium alloys using thermosettingstructural adhesives and primers.NOTE This method can also be used for assessing surface preparation of other metals. Considerablecaution in the evaluation of comparative results should be exercised in the event that the materials (adhesiveplus adherend) and the specimen geometry are varied. Like should be compared with like (only similaradherends bonded with similar adhesives can be compared between themselves).