標準號：UL 1363-2007
中文標準名稱：安全重新配置的電源接頭用UL標準.第3版
英文標準名稱：UL Standard for Safety Relocatable Power Taps Third Edition
標準類型：K30
發布日期：2007/5/2 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K30
國際標準分類號：29.120.30
適用范圍：These requirements cover cord-connected, relocatable power taps rated 250 V AC or less and 20 A AC or less. A relocatable power tap (RPT) is intended only for indoor use as a temporary extension of a grounding alternating-current branch circuit for general use. A cord-connected product with less than three receptacle outlets that employs an electromagnetic interference filter or a transient voltage surge suppressor is covered under the Standard for Electromagnetic Interference Filters, UL 1283, and the Standard for Surge Protective Devices, UL 1449, respectively. A cord-connected product with three or more receptacle outlets that employs an electromagnetic interference filter shall also comply with the Standard for Electromagnetic Interference Filters, UL 1283. A cord-connected product with three or more receptacle outlets that employs a transient voltage surge suppressor shall also comply with the Standard for Surge Protective Devices, UL 1449. Telephone equipment and communication circuit protectors included in a RPT shall comply with the requirements in the Standard for Telephone Equipment, UL 1459, and the requirements in the Standard for Secondary Protectors for Communications Circuits, UL 497A, respectively. A RPT that incorporates an antenna discharge unit or provides antenna connections to a television, a high-voltage video product, or antenna shall comply with the applicable requirements in the Standard for Antenna Discharge Units, UL 452, and the Standard for Audio-Video Products and Accessories, UL 1492. A cord-connected product that employs ground-fault protection is investigated under the requirements in the Standard for Ground-Fault Circuit Interrupters, UL 943. A cord-connected RPT is not intended to be connected to another cord-connected RPT. This standard does not cover RPTs intended for use with medical equipment. Medical equipment is typically intended for use in General Patient Care Areas or Critical Patient Care Areas as defined by Article 517 of the National Electrical Code for Health Care Facilities. RPTs intended for such use shall comply with the requirements of the Standard for Safety of Medical Electrical Equipment, Part 1: General Requirements, UL 60601-1 and the Standard for Safety Requirements for Medical Electrical Systems, IEC 60601-1-1. A RPT may employ non-electrical decorative features. The decorative features may include various shapes such as rocks, birds and animals, etc. These requirements do not cover Decorative Outfits Accessories. Decorative Outfits Accessories are investigated under the requirements in the Standard for Seasonal and Holiday Decorative Products, UL 588.