標準號：SAE AS 8049B-2005
中文標準名稱：民用旋翼飛行器、運輸飛行器和一般航空飛行器座位的性能標準
英文標準名稱：Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft
標準類型：V36
發布日期：2005/1/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V36
國際標準分類號：49.120
引用標準：SAE J 211/1-2003;SAE J 211/2-2001;SAE J 826-2002;SAE J 1733-1994;SAE ARP 5482-2003;SAE ARP 5526-2003;1999-01-1609
適用范圍：This SAE Aerospace Standard (AS) defines minimum performance standards, qualification requirements, and minimum documentation requirements for passenger and crew seats in civil rotorcraft, transport aircraft, and general aviation aircraft. The goal is to achieve comfort, durability, and occupant protection under normal operational loads and to define test and evaluation criteria to demonstrate occupant protection when a seat/occupant/restraint system is subjected to statically applied ultimate loads and to dynamic impact test conditions set forth in the applicable Federal Aviation Regulations 14 CFR 23, 25, 27, or 29. Guidance for test procedures, measurements, equipment, and interpretation of results is presented to promote uniform techniques and to achieve acceptable data. While this document addresses system performance, responsibility for the seating system is divided between the seat supplier and the installation applicant. The seat suppliers responsibility consists of meeting all the seat system performance requirements and obtaining and supplying to the installation applicant all the data prescribed by this document. The installation applicant has the ultimate system responsibility in assuring that all requirements for safe seat installation have been met.