標準號：DIN EN ISO 11114-4-2005
中文標準名稱：移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇耐氫脆的金屬材料的試驗方法
英文標準名稱：Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); English version of DIN EN ISO 11114-4
標準類型：J74
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J74
國際標準分類號：23.020.30;23.060.40
引用標準：ISO 4287;ISO 7539-1-1987;ISO 7539-6-2003;ISO 9809-1;ISO 9809-2;ISO 9809-3;ISO 11114-1-1997;ISO 11120
適用范圍：This part of ISO 11114 specifies test methods and the evaluation of results from these tests in order to qualifysteels suitable for use in the manufacture of gas cylinders (up to 3 000 I) for hydrogen and other embrittlinggases.This part of ISO 11114 only applies to seamless steel gas cylinders.The requirements of this part of ISO 11114 are not applicable if at least one of the following conditions for theintended gas service is fulfilled 1):-- the working pressure of the filled embrittling gas is less than 20 % of the test pressure of the cylinder;-- the partial pressure of the filled embrittling gas of a gas mixture is less than 5 MPa (50 bar) in the case of hydrogen and other embrittling gases, with the exception of hydrogen sulphide and methyl mercaptan in which cases the partial pressure shall not exceed 0,25 MPa (2,5 bar).