標準號：BS EN 13683-2003+A2-2011
中文標準名稱：園藝設備.整體式電動粉碎機/切片機.安全性
英文標準名稱：Garden equipment. Integrally powered shredders/chippers. Safety
標準類型：Q87
發布日期：2003/11/26 12:00:00
實施日期：2003/11/26 12:00:00
中國標準分類號：Q87
國際標準分類號：65.060.70
引用標準：EN 953-1997+A1-2009;EN 954-1-1996;EN 1070-1998;EN 61032-1998;EN ISO 354-2003;EN ISO 3744-1995;EN ISO 11201-1995;EN ISO 11688-1-1998;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13849-1-2008;EN ISO 13857-2008;ISO 3767-1-1998;ISO 3767-3-1995;ISO 3767-4-19
適用范圍：This European Standard specifies safety requirements and their verification for the design andconstruction of hand fed, shredders/chippers with integral power source and with or without vacuumassisted collection which are designed primarily to reduce organic material to smaller pieces. It is onlyapplicable to shredders/chippers that are designed for use outdoors in a stationary position by anoperator standing on the ground. This standard applies to shredders/chippers with feed intakeopenings or segments, in this standard referred to as feed safety openings and being of any shapecomplying with the safety distance requirements of this standard with regard to contact with thecutting means, that in total will fit into a square of 250 mm × 250 mm measured at the plane of theopening(s).This standard describes methods of elimination or reduction of hazards arising from the use ofshredders/chippers. In addition it specifies the type of information to be provided by the manufactureron safe working practices.This standard does not cover requirements for:? units driven by an external power source;? mobile use of units which can be used in both stationary and mobile modes;? units with powered discharge intended to broadcast material or load vehicles;? units with separate mechanically powered feed intake or attachments;? units with cutting means of either one or more non-metallic filaments, or one or more non-metalliccutting elements pivotally mounted on a generally circular central drive unit, where these cuttingelements rely on centrifugal force to achieve cutting, and have a kinetic energy for each singlecutting means of less than 10 J;? electrical powered and battery-powered shredders/chippers.Environmental hazards and EMC have not been considered in this standard.This standard deals with all significant hazards, hazardous situations and events relevant toshredders/chippers, when they are used as intended (see clause 4).This document is not applicable to shredders/chippers which are manufactured before the date ofpublication of this document by CEN.