標準號：BS ISO 14427-2004
中文標準名稱：鋁生產用含碳材料.冷和微熱搗實糊料.非烤試驗樣品的制備和壓實后表觀密度的測定
英文標準名稱：Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
標準類型：H92
發布日期：2004/12/23 12:00:00
實施日期：2004/12/23 12:00:00
中國標準分類號：H92
國際標準分類號：71.100.10
適用范圍：This European Standard specifies minimum requirements for materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite cylinders with a water capacity from 0,5 litre up to and including 150 litres for liquefied petroleum gases (LPG) exposed to ambient temperatures, with a test pressure of 30 bar. This standard is only applicable to cylinders which are fitted with a pressure relief valve (see 4.1.3). NOTE 1 Cylinders made to this standard are suitable for the temperature range of -40 ℃ to 50 ℃. This standard is applicable to cylinders with a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by fibres of glass, carbon or aramid (or a mixture thereof). This standard is also applicable to composite cylinders without liners. NOTE 2 This standard does not address the design, fitting and performance of removable protective sleeves. Where these are fitted, the choice of material and sleeve performance should be considered separately.