標準號：BS EN ISO 10846-4-2003
中文標準名稱：聲學和振動.彈性元件的振動-聲傳輸特性的實驗室測量.平動用除彈性支撐外的構件的動態勁度
英文標準名稱：Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elements other than resilient supports for translatory motion
標準類型：A59;J04
發布日期：2003/10/28 12:00:00
實施日期：2003/10/28 12:00:00
中國標準分類號：A59;J04
國際標準分類號：17.140.01
適用范圍：ISO 10846-4:2003 specifies two methods for determining the dynamic transfer stiffness for translations of resilient elements other than resilient supports. Examples are resilient bellows, shaft couplings, power supply cables, hoses and pipe hangers. Elements filled with liquids, such as oil or water, are excluded.The methods are applicable to resilient elements with flat flanges or flat clamp interfaces. It is not necessary that the flanges be parallel.The direct method can be applied in the frequency range from 1 Hz up to a frequency that is usually determined by the frame resonance of the test arrangement (typically 300 Hz for test rigs with dimensions of the order of 1 m).The indirect method covers a frequency range that is determined by the test set-up and the isolator under test. The range is typically from a lower frequency between 20 Hz and 50 Hz to an upper frequency between 2 kHz and 5 kHz.The data obtained according to the methods specified in ISO 10846-4:2003 can be used for product information provided by manufacturers and suppliers, information during product development, quality control, and calculation of the transfer of vibration through resilient elements.