標準號：ISO 10231-2003
中文標準名稱：摩托車輪胎.驗證輪胎性能的試驗方法
英文標準名稱：Motorcycle tyres - Test methods for verifying tyre capabilities
標準類型：G41
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G41
國際標準分類號：83.160.10
適用范圍：This International Standard specifies test methods for verifying the capabilities of tyres for motorcycles. Of the test methods presented, only some may be required depending on the type of tyre to be tested. The tests are carried out in the laboratory under controlled conditions. It includes a strength test for assessing the capability of the tyre structure, with respect to breaking energy, in the tread area. A second test, the endurance test, assesses the resistance of the tyre with respect to service at full load and moderate speed over long distances. The third test, the high-speed test, assesses the capability of the tyre as related to service at the maximum speed capability of the tyre. It is not applicable to tyres with a speed capability below 130 km/h. The centrifugal growth test assesses the maximum growth of the tyre under the influence of centrifugal forces at the maximum speed capability of the tyre. This is applicable only to road tyres with speed symbols P and above. The test methods presented in this International Standard are not intended for gradation of tyre performance or quality levels. This International Standard is applicable to all motorcycle tyres.