標準號：BS EN 1993-1-3-2006
中文標準名稱：歐洲法規3.鋼結構的設計.一般規則.冷成型薄模和薄板補充規則
英文標準名稱：Eurocode 3. Design of steel structures - General rules - Supplementary rules for cold-formed members and sheeting
標準類型：P26
發布日期：2006/11/30 12:00:00
實施日期：2006/11/30 12:00:00
中國標準分類號：P26
國際標準分類號：91.010.30;91.080.10
引用標準：EN 1993;EN 10002;EN 10025-1;EN 10025-2;EN 10025-3;EN 10025-4;EN 10025-5;EN 10143;EN 10149;EN 10204;EN 10268;EN 10292;EN 10326;EN 10327;EN-ISO 12944-2;EN 1090-2;EN 1994;EN ISO 1478;EN ISO 1479;EN ISO 2702;EN ISO 7049;EN ISO 10684;ISO 4997;EN 508-1;FEM 10.2
適用范圍：(1)EN 1993-1-3 gives design requirements for cold-formed members and sheeting. It applies tocold-formed steel products made from coated or uncoated hot or cold rolled sheet or strip, that havebeen cold-formed by such processes as cold-rolled forming or press-braking. It may also be used for the designof profiled steel sheeting for composite steel and concrete slabs at the construction stage, see EN 1994. Theexecution of steel structures made of cold-formed members and sheeting is covered in EN 1090.(2) Methods are also given for stressed-skin design using steel sheeting as a structural diaphragm.(3) This part does not apply to cold-formed circular and rectangular structural hollow sections supplied to EN10219, for which reference should be made to EN 1993-1-1 and EN 1993-1-8.(4) EN 1993-1-3 gives methods for design by calculation and for design assisted by testing. The methods fordesign by calculation apply only within stated ranges of material properties and geometrical proportions forwhich sufficient experience and test evidence is available. These limitations do not apply to design assisted bytesting.(5) EN 1993-1-3 does not cover load arrangement for testing for loads during execution and maintenance.(6) The calculation rules given in this standard are only valid if the tolerances of the cold formed memberscomply with EN 1090-2