標準號:IEC 60216-6-2006
中文標準名稱:電氣絕緣材料.耐熱性能.第6部分:使用固定時間框架法測定絕緣材料的耐熱指數(TI和RTE)
英文標準名稱:Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
標準類型:K15
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:K15
國際標準分類號:29.035.01
適用范圍:This part of IEC 60216 specifies the experimental and calculation procedures for deriving thethermal endurance characteristics, temperature index (TI) and relative thermal enduranceindex (RTE) of a material using the “fixed time frame method (FTFM)”.In this protocol, the ageing takes place for a small number of fixed times, using the appropriatenumber of ageing temperatures throughout each time, the properties of the specimensbeing measured at the end of the relevant time interval. This differs from the procedure ofIEC 60216-1, where ageing is conducted at a small number of fixed temperatures, propertymeasurement taking place after ageing times dependent on the progress of ageing.The diagnostic tests employed in the fixed time frame method are restricted to destructivetests. The method has not as yet been applied to non-destructive or proof test procedures.Both the TI and the RTE determined according to the FTFM protocol are derived fromexperimental data obtained in accordance with the instructions of IEC 60216-1 andIEC 60216-2 as modified in this standard. The calculation procedures and statistical tests aremodified from those of IEC 60216-3 and IEC 60216-5.
相關標準
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;