標準號：IEC 61810-7-2006
中文標準名稱：機電式元件繼電器.第7部分:試驗和測量程序
英文標準名稱：Electromechanical elementary relays - Part 7: Test and measurement procedures
標準類型：K31
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K31
國際標準分類號：29.120.70
適用范圍：This part of IEC 61810 states the test and measurement procedures for electromechanicalelementary relays. It covers basic considerations which are, in general, common to all types ofelectromechanical elementary relays. Supplementary requirements may be necessitated byspecific designs or application.The test and measurement procedures of this standard are described as individual provisionscovering a specific requirement. When combining them in a test programme, care must betaken (for example by suitable grouping of tested relays) to ensure that preceding tests do notdevalue subsequent ones.Where in this standard the term “specified” is used, this means a prescription in theappropriate documentation for the relay, for example manufacturer’s data sheet, testspecification, customer detail specification. For application within the IECQ system suchprescriptions are contained in the detail specification as defined in Clause A.7 of QC 001001.NOTE 1 To improve the readability of this standard, the term “relay” is generally used in place of“electromechanical elementary relay”.NOTE 2 Requirements and tests related to the type testing of electromechanical elementary relays are containedin IEC 61810-1. For that purpose, the generally described test and measurement procedures of this standard havebeen prescribed in a more restricted and stringent form in IEC 61810-1.NOTE 3 Standards covering relays subjected to quality assessment in accordance with IECQ are compiled in theIEC 61811 series of publications.