標準號：BS EN ISO 2234-2002
中文標準名稱：包裝.完全滿裝的運輸包裝和成組裝運.利用靜態裝載法進行堆積試驗
英文標準名稱：Packaging. Complete, filled transport packages and unit loads. Stacking tests using a static load
標準類型：A83
發布日期：2002/10/3 12:00:00
實施日期：2002/10/3 12:00:00
中國標準分類號：A83
國際標準分類號：55.180.40
適用范圍：This International Standard specifies three methods for carrying out a stacking test on a complete, filled transport package, or on a unit load, using a static load. Whichever method is employed, the test may be used to assess the performance of a package or a unit load, in terms of its strength or the protection that it offers to its contents when it is subjected to stacking. It may be performed either as a single test to investigate the effects (deformation, creep, collapse or failure) of stacking or as part of a sequence of tests designed to measure the ability of a package or a unit load to withstand a distribution system that includes a stacking hazard. The test may also be used to investigate performance under particular conditions of loading, as, for example, when the bottom package in a stack rests on an open-decked pallet; or when the profile of the superimposed load is eccentric, as when it is supported on the bearers of a single-decked pallet which rests on a container. For such purposes, one of the three methods of carrying out the test may be more suitable than the others. NOTE A method for carrying out a stacking test using a compression tester is given in ISO 12048. note: 1) ISO 12048, Packaging — Complete, filled transport packages — Compression and stacking tests using a compression tester.