標準號：BS EN 60684-3-343 to 345-2002
中文標準名稱：絕緣軟套管規格.各種型號套管的規格要求.無涂層可擴張編織的乙烯-三氟氯乙烯(E-CTFE)紡織套管.活頁343至345:無涂層可擴張編織的乙烯氯三氟乙烯(E-CTFE)紡織套管
英文標準名稱：Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated - Sheets 343 to 345: Expandable braided ethylene chlorot
標準類型：K15
發布日期：2002/12/19 12:00:00
實施日期：2002/12/19 12:00:00
中國標準分類號：K15
國際標準分類號：29.035.20
適用范圍：This International Standard gives the requirements for sleeving having the property ofexpanding its internal diameter when compressed longitudinally and thereafter returning toits initial diameter after release of the compressing force. This expandable braided textilesleeving, uncoated, is constructed of ethylene chlorotrifluoroethylene (E-CTFE) monofilamentyarns suitably processed to provide the mechanical ability to conform in the manner describedabove. These sleevings have been found suitable for use at temperatures up to 155 C.This sleeving is normally supplied in internal diameters between 6 mm and 63 mm and in threelevels of wall thickness (thin (sheet 343), medium (sheet 344), and thick (sheet 345)). It isnormally supplied in the following colours: black, white, brown, red, orange, yellow, green, blue,grey, and natural.Because of its open construction, this sleeving is normally used to provide air-space insulation.Therefore, no requirement for breakdown voltage is specified in this standard. (Any value forthis property should be given in the purchase contract, but a typical value is 1,5 kV/mm wallthickness, although a linear relationship cannot be assumed.) However, it serves to providemechanical protection to circuit components such as wires, sleeves, and flat cable over which itis applied as a containing wrap or harness.Materials which conform to this specification meet established levels of performance. However,the selection of a material by a user for a specific application should be based on the actualrequirements necessary for adequate performance in that application and not based on thisspecification alone.