標準號：BS EN 930-1997+A2-2009
中文標準名稱：鞋類、皮革和仿皮革產品生產機械.粗加工、刷洗、上光和整理機械.安全要求
英文標準名稱：Footware, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
標準類型：Y94
發布日期：1997/12/15 12:00:00
實施日期：1997/12/15 12:00:00
中國標準分類號：Y94
國際標準分類號：61.060
引用標準：EN 294-1992;EN 547-2;EN 574;EN 626-1-1994;EN 894-1;EN 953-1997;EN 982-1996;EN 983-1996;EN 999;EN 1005-2;EN 1005-3;EN 1037;EN 1088-1995;EN 1093-1;EN 1127-1-2007;EN 12545-2000;EN ISO 11688-1;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13849-1;EN ISO 1385
適用范圍：1.1 This standard applies to the following machines which are intended to work material for the manufacture of footwear:-Automatic and manual roughing, scouring and polishing machines;- Automatic and manual edge contour trimming machines.1.2 This standard does not apply to modular shoe repair machines.1.3 This standard specifies safety requirements for design, construction and operation.It takes account of intended use, foreseeable misuse, component and system failure.1.4 This standard covers all hazards relevant to the footwear, leather and imitation leather goodsmanufacturing industries.The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation.1.5 This document is not applicable to roughing, scouring, polishing and trimming machines which aremanufactured before the date of its publication as EN.