標準號：SAE J747-1990
英文標準名稱：Control Valve Test Procedure, Standard May 1990
發布日期：1990/1/1 12:00:00
實施日期：1999/12/31 12:00:00
國際標準分類號：23.100.50;43.040.40
引用標準：SAE J916;SAE J1116;SAE J1117;SAE J1165;SAE J1235;SAE J1276;ANSI B.93.2-1971;ANSI Y14.17-1966;ISO R 1219-1970
適用范圍：This SAE Standard applies to hydraulic directional control valves as applied to self-propelled workmachines referenced in SAE J1116. It describes a laboratory test procedure for evaluating:a. Flow versus pressure dropb. Leakage ratec. Operating effortd. Metering characteristics versus spool travel, pilot pressure, or electrical currente. Relief valve characteristicsThe document applies to single and multiple section hydraulic directional control valves.This document illustrates axial, manually operated valves although the test procedure is applicable to other input forms such as rotary actuation, electric current, hydraulic or pneumatic pressure.NOTE—Performance characteristics such as metering hysteresis or dynamic response may have asignificant effect on some of these tests.1.1 Purpose—To provide a uniform procedure for measuring and reporting the operating characteristics of a hydraulic directional control valve and associated relief valve when so equipped.