標準號：IS 11016-1984
發布日期：1985/1/1 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：1.1 Identifies the basic requirements with regard to safety provisions for machines tools and their accessories and is applicable for new designs as well as re-designs and modifications and describes the safety measures to be adopted ( a ) at the actual place of working; and (b) for setting, utilisation and maintenance of machine tools and their accessories.1.2 Provides a general guidelines for safety on machine tools and their operations.1.3 Provides a general guideline and wherever specific limits are to be applied for values such as noise, vibration, etc, reference shall be made to relevant standards on specific subjects.Note t — In all such cases where it has not been possible to identify specific causes or identify specific limiting values the best possible safety practices identified to overcome such specific cases should be practcised.Note 2 — A number of related standards have been identified and listed and given in Appendix A. However, wherever a doubt arises regarding the application of a particular standard, a decision regarding the applicability to be taken keeping in mind the safety requirements to be provided.