標準號：DIN EN ISO 13849-1-2008
中文標準名稱：機械安全.控制系統的安全相關部件.第1部分:設計用一般原理(ISO 13849-1-2006).英文版本DIN EN ISO 13849-1-2008
英文標準名稱：Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006); English version of DIN EN ISO 13849-1:2008-12
標準類型：C66
發布日期：1999/12/31 12:00:00
實施日期：2008/12/1 12:00:00
中國標準分類號：C66
國際標準分類號：13.110
引用標準：ISO 12100-1-2003;ISO 12100-2-2003;ISO 13849-2-2003;ISO 14121;IEC 60050-191-1990;IEC 61508-3-1998;IEC 61508-4-1998
適用范圍：This part of ISO 13849 provides safety requirements and guidance on the principles for the design andintegration of safety-related parts of control systems (SRP/CS), including the design of software. For theseparts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safetyfunctions. It applies to SRP/CS, regardless of the type of technology and energy used (electrical, hydraulic,pneumatic, mechanical, etc.), for all kinds of machinery.It does not specify the safety functions or performance levels that are to be used in a particular case.This part of ISO 13849 provides specific requirements for SRP/CS using programmable electronic system(s).It does not give specific requirements for the design of products which are parts of SRP/CS. Nevertheless, theprinciples given, such as categories or performance levels, can be used.NOTE 1 Examples of products which are parts of SRP/CS: relays, solenoid valves, position switches, PLCs, motorcontrol units, two-hand control devices, pressure sensitive equipment. For the design of such products, it is important torefer to the specifically applicable International Standards, e.g. ISO 13851, ISO 13856-1 and ISO 13856-2.NOTE 2 For the definition of required performance level, see 3.1.24.NOTE 3 The requirements provided in this part of ISO 13849 for programmable electronic systems are compatible withthe methodology for the design and development of safety-related electrical, electronic and programmable electroniccontrol systems for machinery given in IEC 62061.NOTE 4 For safety-related embedded software for components with PLr = e see IEC 61508-3:1998, Clause 7.NOTE 5 See also Table 1.