標準號：IEEE C 37.41-2008
中文標準名稱：高壓(>1000 V)熔斷器,熔斷器和熔斷,分配閉合式單*空氣開關,熔斷器斷開開關以及與這些設備配套使用的熔斷器連線和附件的設計試驗
英文標準名稱：Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
標準類型：K31
發布日期：2008/11/10 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K31
引用標準：ANSI C37.42;ANSI C37.46;ANSI C37.47;ANSI C63.2-1987;IEC 60282-1;IEC 60282-2;IEEE 4-1995;IEEE C37.20.3;IEEE C37.40;IEEE C37.43;IEEE C37.45;IEEE C37.48
適用范圍：This standard specifies design test requirements for high-voltage (above 1000 V) fuses, distributionenclosed single-pole air switches, disconnecting cutouts, fuse disconnecting switches, and accessories foruse on ac power and distribution systems. Devices with rated maximum voltages to 170 kV are covered.The devices to which this standard applies are as follows:a) Distribution and power class expulsion type fusesb) Distribution and power class current-limiting type fusesc) Distribution and power class fuse disconnecting switchesd) Item a) through item c) used in fuse enclosure packagese) Fuse supports of the type intended for use with distribution and power class fuses, and fusedisconnecting switchesf) Fuse and disconnecting cutoutsg) Disconnecting devices created by the use of a removable switch blade in a distribution or powerclass fuse supporth) Distribution class enclosed single-pole air switchesi) Distribution class and power class expulsion, current-limiting, and combination types ofexternal capacitor fuses used with a capacitor unit, groups of units, or capacitor banksj) Backup current-limiting fuses (“motor-starter fuses”) used in conjunction with high-voltageClass E2 motor starters (see ANSI/UL 347-2000 [B1])1k) Fuse links when used exclusively with distribution class and power class fuses, and distributionclass and power class fuse disconnecting switchesl) Item a) through item d) and item f) through item i) having integral load-break meansThis standard specifies the minimum testing requirements for fuses and related devices. Suchstandardization is needed to ensure uniform minimum product testing for devices within the documentscope. Test areas covered are based on historical experience.