標準號：BS EN 50131-1-2006+A1-2009
中文標準名稱：警報系統.闖入和攔截系統.第1部分:系統要求
英文標準名稱：Alarm systems — Intrusion and hold-up systems — Part 1: System requirements
標準類型：A91
發布日期：2006/11/30 12:00:00
實施日期：2006/11/30 12:00:00
中國標準分類號：A91
國際標準分類號：13.320
引用標準：CLC/TS 50131-7-2003;EN 50130-4-1995;EN 50130-5-1998;EN 50131-6-1997;EN 50136-1-1-1998;EN 60065-2002;EN 60073-2002;EN 60950-1-2006;EN 61000-6-3-2007
適用范圍：This European Standard specifies the requirements for Intrusion and Hold-up Alarm Systems installed inbuildings using specific or non-specific wired interconnections or wire-free interconnections. Theserequirements also apply to the components of an I&HAS installed in a building which are normally mountedon the external structure of a building e.g. ancillary control equipment or warning devices. The standard doesnot include requirements for exterior I&HAS.This standard specifies performance requirements for installed I&HAS but does not include requirements fordesign, planning, installation, operation or maintenance.These requirements also apply to I&HAS sharing means of detection, triggering, interconnection, control,communication and power supplies with other applications. The functioning of an I&HAS shall not beadversely influenced by other applications.Requirements are specified for I&HAS components where the relevant environment is classified. Thisclassification describes the environment in which an I&HAS component may be expected to functi onas designed. When the requirements of the four environmental classes are inadequate, due to the extremeconditions experienced in certain geographic locations, special national conditions are given in Annex A.General environmental requirements for I&HAS components are described in Clause 7.The requirements of this European Standard also apply to IAS and HAS when these systems are installedindependently.When an I&HAS does not include functions relating to the detection of intruders, the requirements relating tointrusion detection do not apply.When an I&HAS does not include functions relating to hold-up, the requirements relating to hold-up do notapply.NOTE Unless otherwise stated the abbreviation I&HAS is intended to also mean IAS and HAS.