標準號：BS EN 50106-2008
中文標準名稱：家用和類似用途電器的安全性.EN 60335-1標準范圍進行例行試驗的特殊規則
英文標準名稱：Safety of household and similar electrical appliances — Particular rules for routine tests referring to appliances under the scope of EN 60335-1
標準類型：Y60
發布日期：2009/1/31 12:00:00
實施日期：2009/1/31 12:00:00
中國標準分類號：Y60
國際標準分類號：97.030
適用范圍：The tests detailed in this standard are carried out by the manufacturer and apply to products within thescope of EN 60335-1.These tests are intended to reveal a variation during the manufacture of appliances which could impairsafety. They do not impair the properties and the reliability of the appliance and are to be carried out oneach appliance. They are normally carried out on the complete appliance after assembly but themanufacturer may perform the tests at an appropriate stage during production, provided latermanufacturing operations would not affect the results.NOTE Components are not subjected to these routine tests if they have been previously checked by suitable routine tests.The manufacturer may use a test procedure which is better suited to his production arrangementsprovided that appliances which withstand those tests have at least the same degree of safety asappliances that withstand the tests specified in this standard.The routine tests listed in this standard are the minimum considered necessary to cover essential safetyaspects. It is the responsibility of the manufacturer to decide if additional routine tests are necessary.It may be determined from engineering considerations that some of the tests required in this standard areimpracticable or inappropriate and therefore unnecessary.If a product fails any of the tests, it is subjected to all of the tests after repair and/or adjustment.There are no additional requirements for particular appliances unless stated in the relevant standardsheet of Section 2.