標準號：DIN EN 13363-1-2007
中文標準名稱：裝有玻璃窗的遮陽設備.日光和光的透射率的計算.第1部分:簡化的方法
英文標準名稱：Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method(includes Amendment A1:2007) English version of DIN EN 13363-1:2007-09
標準類型：P32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：P32
國際標準分類號：17.180.20;91.120.10
引用標準：EN 410-1998;EN 673;EN 674;EN 675;EN ISO 7345-1995
適用范圍：This European Standard specifies a simplified method based on the thermal transmittance and total solar energy transmittance of the glazing and on the light transmittance and reflectance of the solar protection device to estimate the total solar energy yransmittance of a solar protection device combined with glazing.The method applies to all types of solar protection devices parallel to the glazing such as louvre ,venetian or roller blinds.The position of the solar protection device can be interior ,exterior or between single panes in a dual glazing system.It is applicable when the total solar energy transmittance of the glazing is between 0,15 and 0,85.Venetian or louvre blinds are assumed to be adjusted so that there is no direct solar penetration.It is assumed that for external solar protection devices and for integrated solar protection devices this space is ventilated.The resulting g-values of the simplified method given here are approximate and their deviation from the exact values lie within the range between +0,10 and -0,02.The results generally tend to lie on the safe side for cooling load estimations.The results are not intended to be used for calculating beneficial solar gains or thermal comfort criteria.The simplified method is based on the normal incidence of radiation and does not take into account either the angular dependence of transmittance and the reflectance or the difference or the defferences of spectral distribution.This standard can be applied when the solar transmittance and solar reflectance of the solar protection devices are within the following ranges:0≤ζe,B≤0,5 and 0,1≤ρe,B≤0,8For reflectance and transmittance values outside these ranges EN 13363-2[1] applies.An allowance canbe made for this fact when applying the method .For cases not covered by the method given in this standard more exact calculations based on the optical properties (in general the spectral data )of glass and solar protection device can be carried out in accordance with EN13363-2[1].