標準號：ISO 8434-1-2007
中文標準名稱：液壓傳動和通用金屬管連接件.第1部分:24°錐形接頭
英文標準名稱：Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors
標準類型：J15
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J15
國際標準分類號：23.100.40
引用標準：ISO 48;ISO 228-1-2000;ISO 261;ISO 965-1-1998;ISO 1127;ISO 1179-1;ISO 1179-2;ISO 1179-4;ISO 3304;ISO 3305;ISO 3601-3-2005;ISO 4759-1-2000;ISO 5598-1985;ISO 6149-1;ISO 6149-2;ISO 6149-3;ISO 9927;ISO 9974-1;ISO 9974-2;ISO 9974-3;ISO 12151-2;ISO 19879-2005
適用范圍：This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors usingcutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes withoutside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and generalapplications within the limits of pressure and temperature specified in this part of ISO 8434.They are intended for the connection of plain end tubes and hose fittings to ports in accordance withISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.)These connectors provide full-flow connections in hydraulic systems operating to the working pressuresshown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily,these values are not to be understood as guaranteed minimums. For every application, sufficient testing willneed to be conducted and reviewed by both the user and manufacturer to ensure that required performancelevels are met.NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where therequirements of the application allow for the use of elastomeric seals, connector designs that conform to InternationalStandards and incorporate elastomeric sealing are preferred.NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4.This part of ISO 8434 also specifies a performance and qualification test for these connectors.