標準號：IEC 60695-10-3-2016
中文標準名稱：著火危險試驗.第10-3部分:非正常熱.模壓應力釋放變形試驗
英文標準名稱：Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
標準類型：C80;K04
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：C80;K04
國際標準分類號：13.220.40;29.020
引用標準：IEC GUIDE 104-2010;IEC 60050-55-1970;IEC 60050-101-1998;IEC 60050-102-2007;IEC 60050-103-2009;IEC 60050-111-1996;IEC 60050-111 AMD 1-2005;IEC 60050-112-2010;IEC 60050-113-2011;IEC 60050-113 CORR 1-2011;IEC 60050-113 AMD 1-2014;IEC 60050-114-2014;IEC 60050
適用范圍：This part of IEC 60695 specifies a mould stress relief distortion test. It is applicable to electrotechnical equipment including parts made from polymeric materials. This test method is intended to evaluate the effects caused by relief of the residual process- induced stress, set in a moulded polymeric assembly of an end product. This stress relief occurs when the sample (energized or not), is exposed to conditioning at a defined temperature for a defined period of time. The test specimen is considered to have satisfactorily withstood the test if, after conditioning to room temperature, it meets defined test criteria. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.