標準號：BS EN ISO 6185-4-2011
中文標準名稱：充氣艇.發動機額定功率為15 kW及以上,艇體長度為8-24 m的充氣艇
英文標準名稱：Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
標準類型：U18
發布日期：2011/7/31 12:00:00
實施日期：2011/7/31 12:00:00
中國標準分類號：U18
國際標準分類號：47.080
引用標準：ISO 1817;ISO 2411;ISO 3011;ISO 4674-1;ISO 4675;ISO 6185-3-2001;ISO 7010-2011;ISO 8099;ISO 8666;ISO 8847;ISO 8848;ISO 9093;ISO 9094;ISO 10087;ISO 10088;ISO 10133;ISO 10239;ISO 10240;ISO 10592;ISO 11105;ISO 11591;ISO 11812-2001;ISO 12215-3-2002;ISO 12215-5
適用范圍：This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials,manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with amotor power rating of 15 kW and greater.This part of ISO 6185 is applicable to Type IX and Type X RIBs intended for use within the operatingtemperatures of ?20 °C to +60 °C.? Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboardsides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufortand significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and24 m and with a motor power rating of 15 kW and greater.? Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides,suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m(design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kWand greater.NOTE 1 General arrangements of typical boats of Types IX and X are given in Annexes A and B, respectively.NOTE 2 For boats with power ratings of 4,5 kW and less, refer to ISO 6185-1. For boats with power ratings of 4,5 kWto 15 kW inclusive, refer to ISO 6185-2. For boats with a hull length of less than 8 m and power rating of 15 kW andgreater, refer to ISO 6185-3.Boats outside these types or outside of Type IX and Type X, as defined, are outside of the scope of ISO 6185.NOTE 3 For inflatable boats with a hull length greater than 8 m, it is suggested to use the requirements of ISO 6185-3.