標準號：BS EN ISO 10893-10-2011
中文標準名稱：鋼管的無損檢測.橫向和/或縱向缺陷探測用無縫和焊接(埋弧焊除外)鋼管的自動全周界超聲波檢驗
英文標準名稱：Non-destructive testing of steel tubes. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
標準類型：H26
發布日期：2011/4/30 12:00:00
實施日期：2011/4/30 12:00:00
中國標準分類號：H26
國際標準分類號：23.040.10;77.040.20;77.140.75
引用標準：ISO 5577;ISO 9712;ISO 11484
適用范圍：This part of ISO 10893 specifies requirements for automated full peripheral ultrasonic shear wave (generatedby conventional or phased array technique) testing of seamless and welded [except submerged arc-welded(SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections.Unless otherwise specified in the purchase order, the testing method is applicable to the detection ofpredominantly longitudinal imperfections.In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of themanufacturer.For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of this part ofISO 10893 can be applied to detect imperfections having other orientations.This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter greater than or equalto 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5.This part of ISO 10893 can also be applicable to the testing of circular hollow sections.NOTE For options for testing tubes with an outside diameter-to-thickness ratio less than 5 on longitudinalimperfections, see Annex A.